Krishna Chemicals
 

  CHEMICAL SPECIFICATIONS
"M"


MALEIC ANHYDRIDE
Test Results

Physical Appearance

White Pellets
Colour of the molten material (APHA)
20
Crystallising Point (°C)
52.4
Maleic Acid (% wt.) expressed as C2H2(COOH)2
0.08
total Available Acidity expressed as C4H2O3 (% wt.)
99.7
Packing
25 Kgs Net weight in HDPE bags

METHANE SULPHONYL CHLORIDE
Test Results

Appearance
Colourless and transparent oil liquid
Moisture
80 ppm
Heavy Metal
6 ppm
Iron
5 ppm
Freezing Point
-32°C
Boiling Point
161°C
Specific Density
1.4805
Refractive Index
1.4520
Packing
250kgs plastic drum



METHANOL
Test Unit Test Method Results

Purity

 wt% ASTM E-346
99.98
Water
 wt% ASTM D-1364
0.0067
Ethanol
 wt% ASTM E-346
0.0044
Specific Gravity @20°/20°
 - ASTM D-4052
0.7925
Acetone
 wt% ASTM E-346
Less than 0.007
Permanganate time
- ASTM D-1363
Greater than 50 ME
Non Volatile matter
 - ASTM D- 1353
Less than 0.0005gm
Distillation range @750 MMHG
 DEGC ASTM D-1078
0.4 including 64.5°
Colour, Pt-Cobalt scale
 - ASTM D-1209
Below 6 Apha
Carbonizable, Pt-Cobalt scale
 - ASTM E-346
Below 30 Apha
Clearance
 - -
Clear and free from suspended matter
Odour
 - ASTM D-1296
Non-residual
Acidity as CH3COOH
 wt% ASTM D-1613
0.002
Iron
 PPM ASTM E-202
0.01
Chloride
 PPM ASTM D-512
0.01
Miscibility
 - ASTM D-1722
Passes test
Alkalidity ASNN3
wt% ASTM D-1614
NIL



METHYL BENZENE: METHYL PHENYL ETHER
Test Results

Appearance
Clear Colourless liquid
Odour
Characteristic aromatic
Solubility
Soluble in alcohol & ether. Insol. in water
Specific Gravity
0.99
Freezing Point
-38.8°C
Boiling Point
154°C - 155°C
Flash Point
(21°C - 55°C)
Packing
200kg. HDPF, Drums
Hazards
Inflammable



METHYL BENZOATE
Test Results

Appearance
Colourless liquid
Odour Description
Pungent, Heavy-sweet, Deep-floral
Melting point
15°C
Boiling point
200°C
Specific Gravity @25°C
1.0850 to 1.850 gm/cm³
Refractive Index @20°C
1.5150 to 1.5180
Acid Value
max. 1 mgKOH/gm
Assay
99%
Solubility
0.02% Soluble in water
% Purity by GLC
99.2%
Column used for GLC analysis
FFAP, 15% Packed column



METHYL CELLOSOLVE
Test Results

Appearance
Clear Liquid
Colour
Colourless
Acidity as Acetic Acid %
0.0033
Water Content %
0.25
Distillation Range %
123.0 - 124.2



METHYLENE CHLORIDE
Test Unit Test Method Results

Appearance

   Visual
(01)
Colour Hazen
  ASTM D-2108
<5
Moisture
 ppm wt ASTM D-3401
40
Acidity as HC1
 ppm wt ASTM D-2989
<1
Residue on evaporation
 ppm wt ASTM D-2109
<10
Free chlorine
  ASTM D-4755
Negative
Methylene chloride
wt% SGS SPI 016
99.99
Density at 15°C
 g/ml ASTM D-4052
1.3349



METHYL ISO BUTYL KETONE
Test Unit Results

Purity

 wt%
99.53
Water Content
wt%
0.038
Distil range
°C
114.6 - 116.4
SP GR 20/20
°C
0.8022
Non-volatile matter mg/100ml
 
1 2
Acidity WT% as acetic acid
 
0.0030
Colour alpha
  
3
Solubility in water
 
NO



MIX XYLENE
Test Unit ASTM Methods Results

Appearance

   ASTM D-4176
Clear liquid, free from sediments & haze when observed at 18 to 26°C
Colour
APHA ASTM D-1209
20 max.
Relative density @15.56/15.56°C
 - ASTM D-4052
0.865-0.877
Distillation
   ASTM D-850
<1 
     IBP to DP
 °C  
7 max.
     IBP
 °C  
136 min.
     DP
 °C  
143 max.
Acid wash Colour
 - ASTM D-848
6 max.
Acidity
 mg KOH / 100ml ASTM D-847
none detected
Flash point
°C IP - 170
22 min. (Able CC)
Total Aromatics HC (Meta Ortho Para Xylene, +EB)
 wt% ASTM D-2306
99 min.
Non Aromatics
wt% ASTM D-2306
1 max.
Copper Corrosion
- ASTM D-849
Pass (1A o 1B)
Total Sulphur
wt ppm ASTM D-3120
Pass (1A or 1B)

MONO ETHYLENE GLYCOL
Test Typical Value Test Method

Distillation Range °C
     DP, Min.
     DP, Max.


194°
205°

ASTM D-1078
Moiture Content % wt. Max.
0.2
ASTM E-203
Acidity as Acetic acid % wt. Max.
0.005
ASTM D-1613
Iron Cotent, ppm Weight Max.
0.2
ASTM E-202
Chloride as CI ppm, Weight Max.
0.2
SD A-167
Ash % Weight Max.
0.005
ISI 5295
DEG, % Weight Max.
0.2
SD-498
Colour (Pt. Co. scale) Max.
10
ASTM D-1209



MORPHOLINE
Test Results

Odour
amine-like
pH value
10.6 (5 g/l, 20°C)
Melting point
-5 °C
Boiling point
128 - 130 °C
Flash point
32 °C
Lower explosion limit
1.4% (V)
Upper explosion limit
13.1% (V)
Ignition temperature
275 °C
Vapour pressure
10 mbar (20 °C)
Density
1.00 g/cm3 (20 °C)
Solubility in water
(20 °C)
Viscocity, dynamic
2.3 mPa.s (20 °C)



M. T. O.
Test Specification 1 Specification 2

Colour (Saybolt)

+30
+30
Density at 15°C gm/ml
0.770-0.810
0.770-0.820
Flash Point (Abd)
38°C
38°C
Distillation Range
 
 
     IBP      °C
140°C (min.)
140°C (min.)
     FBP     °C
240°C (max.)
240°C (max.)
Aromatic Content      % Vol.
25% (max.)
25% (max.)
Copper Strip Corrosion for 3 Hrs at 50°C
Pasted
Pasted
Residue on Evaporation mg/100ml
Max. 8
Max. 5
Doctor Test
Negative
Negative